All about overunity magnetic motor

A device that produces more energy than it consumes is referred to as an overunity device.  The overunity magnetic motor is a cheap and viable alternative to cut electricity bills of your house. An overunity magnetic motor has a specific magnet arrangement. One set of magnets is arranged on a disk, and a second set of magnets is fixed on the base around the perimeter.  The magnets are arranged in such a way that they alternatively attract and repulse each other. This results in spinning of the disk due to the magnetic properties.  An overunity magnetic motor can run continuously and produce free electricity for at least 400 years, which is the period that the magnets hold their magnetic properties.  

Benefits of an overunity magnetic motor:

1.        It is very compact

2.        It occupies less space, and it can be installed in a small area in your house or your garage

3.        Inexpensive to build

4.        Low running costs

5.        Magnetic motors do not produce excessive heat, even in the long run

6.        Safe technology that guarantees the safety of your home and your family

7.        It can help you save thousands of dollars in electricity bills

8.        All parts needed to build the overunity magnetic motor are locally available in hardware and electric stores

The size of the overunity magnetic motor is the factor that determines how much energy it can produce. An overunity magnetic motor is easy to build, as it is based on basic technology. The magnetic motor produces perpetual motion, which in rotates the rotor. The rotor is the component that converts kinetic energy into electrical energy. You need a few things and some equipment to build an overunity magnetic motor by yourself.  You can find the materials required for construction of the magnetic motor in local hardware stores and electric stores. The tools that you need are generally present in your toolbox, and assembling the parts is easy if you have a set of detailed instructions.

Some important instructions for construction of your overunity magnetic motor:

1.        You can use armature magnets or stator magnets in the construction of your overunity magnetic motor. The air gap between poles of the stator magnets and armature magnets should be 1.5” and the air gap between the under centers of the stator magnets and armature magnets should be 2.7”. The space between two stators magnets should be approximately .5”

2.        The positive ends of stator magnets should point outwards, and all the positive ends of armature magnets should point in same direction. The magnetic orientation of a stator magnet when viewed from top dead center should appear to point up and down. The magnetic orientation of armature magnets should point from a left to right direction when viewed from top dead center.